Drip Products
POLYETHYLENE TUBING
High quality UV resistant polyethylene tubing with color stripe for use in drip irrigation systems for landscapes and agriculture.
Polyethylene Tubing Spec Sheet *pdf
12000760 LP307 1000FT PE 5/16 TUBING
12000940 LP350 500FT PE 11/32 TUBING
12001000 LP187 100FT PE 1/8 TUBING
12001005 LP187 1000FT PE 1/8 TUBING
12001006 LP250 100FT PE 1/4 TUBING
12001007 LP250 1000FT PE 1/4 TUBING
12001008 LP710 100FT PE 1/2 TUBING
12001010 LP710 500FT PE 1/2 TUBING
12001018 LP940 100FT PE 3/4 TUBING
12001020 LP940 500FT PE 3/4 TUBING
12001030 LP1200 500FT PE 1IN TUBING

1/4" DRIPLINE
High quality UV resistant 1/4" diameter polyethylene dripline is available with emitters spaced at 6" and 12" and is ideal for use in drip irrigation systems for the home.
12070110 100FT LP 1/4 6IN EMITTER LINE
12070210 100FT LP 1/4 12IN EMITTER LINE

LP Dripline
12070610 12IN X 6GPH X 100FT LP DRIPLINE
12070630 12IN X 6GPH X 500FT LP DRIPLINE
12070910 12IN X 9GPH X 100FT LP DRIPLINE
12070910 12IN X 9GPH X 500FT LP DRIPLINE

DRIP ZONE
PRIMARY APPLICATION
Features:
- 3/4" Y-Filter male threaded w/155-mesh screen
- 25 PSI Pressure Regulator 0.25-15 gal
- 710 x 3/4" male adapter
- 3/4" x 1" PVC reducing bushing T x T
12000050 L/S PROD DRIP ZONE NO VALVE

PRESSURE REGULATOR
PRIMARY APPLICATION
Eliminate the need for a separate low-flow regulator.
- Reliable control regardless of fluctuation in upstream pressure or flow
- 0.25 – 15 gal @ 25 PSI
- 3/4" NPT female inlet and male outlet thread
- Max. recommended flow: 15 GPM
12000030 L/P 3/4 25PSI PRES REG .25-15G

3/4" & 1" Y–FILTER
PRIMARY APPLICATION
All purpose filter - especially suitable for small emitter systems - designed so that the direction of flow is internal and along the longitudinal axis of the cylinder, causing minimal pressure loss.
- Filter screen - 155 mesh
- Poly screen can be removed for cleaning
- Recommended maximum working pressure: 120 PSI
- Recommended flow rate: 13 gpm for 3/4", 18 gpm for 1"
12000386 3/4 L/S PROD Y-FILTER MPT 155 MESH
12000387 1 L/S PROD Y-FILTER MPT 155 MESH

PC EMITTERS
Turbulent flow pressure compensating emitters with 1/4" self-piercing barb. Available in 1/2, 1 & 2 GPH.
12001511 L/S PROD 0.5 GPH PC EMITTER RED
12001512 L/S PROD 1.0 GPH PC EMITTER BLACK
12001513 L/S PROD 2.0 GPH PC EMITTER GREEN

ISO–FLOW EMITTERS
Pressure compensating from 10 to 40 PSI enables the Iso-Flow to be used in hilly terrain. Can be used as an on-line emitter with or without distribution tubing. When used with feeder tubing it can be used as an off-line emitter. 1/4" barb.
12001520 L/S PROD 0.5 GPH ISOFLO EMIT RD
12001521 L/S PROD 1.0 GPH ISOFLO EMIT BLK
12001522 L/S PROD 2.0 GPH ISOFLO EMIT GRN

UNI–FLOW EMITTERS
Pressure compensating from 10 to 40 PSI. Screws directly onto a 1/2" MIPT adapter or nipple. Can be used with or without distribution tubing. 1/4" barb.
12001524 L/S PROD 1 GPH UNI-FLO PC EMIT
12001525 L/S PROD 2 GPH UNI-FLO PC EMIT

KEY PUNCH
Tool that allows for easy punching of the tubing for installation of barbed emitters and fittings.
12001605 L/S PRODUCT KEY PUNCH

SOCKET ADAPTER
1/2" Compression X 3/4" Socket
12003015 710SA 1/2" X 3/4" SOCKET ADAPTER

COMPRESSION ADAPTERS
- CA250 - Orange .250 Compression X 1/2" PVC Socket
- CA307 - Gray .307 Compression X 1/2" PVC Socket
- CA350 - Black .350 Compression X 1/2" PVC Socket
- CA455 - Red .455 Compression X 1/2" PVC Socket
- CA710 - Blue .710 Compression X 1/2" PVC Socket
- CA930 - Black .930 Compression X 3/4" PVC Socket
- CA1200 - Black 1.200 Compression X 1" PVC Socket
12002810 250CA ORANGE COMPRESSION ADPT
12002840 307CA GREY COMPRESSION ADAPTER
12002880 350CA BLACK COMPRESSION ADAPT
12002910 455CA RED COMPRESSION ADAPTER
12003010 710CA COMPRESSION ADAPTER
12003012 710MA 710 X 3/4 SOCKET ADAPTER
12003210 930CA COMPRESSION ADAPTER
12003295 1200CA COMPRESSION ADAPTER

FIGURE 8 END CLOSURE
For nominal 710 OD tubing
12007210 L/S PROD FIG 8 HOSE END CLAMP

BALL VALVE 3/4" FH Swivel X 3/4 MHT
- Control of individual drip lines
- Maximum pressure - 120 PSI
- Inlet and outlet "O" rings ensure watertight seal
12000360 L/S PROD 3/4 HOSE BALL VALVE

3/4 HOSE WYE WITH INDIVIDUAL VALVES 3/4" FH Swivel X 3/4 MHT X 3/4 MHT
- Control two drip lines with one hose bib
- Maximum pressure - 120 PSI
- Inlet and outlet "O" rings ensure watertight seal
12000365 L/S PROD 3/4 HOSE WYE

3/4 HOSE THREAD CAP With Washer
Use with Model CE compression fitting for manual drip line flushing; on the flush end of Y-Filter for screen flushing.
12000330 L/S PROD 3/4 HOSE CAP W/WASHER

COMPRESSION TEE
Compression X Compression X Compression in 1/2" and 3/4"
12003060 710C3T 3 WAY COMPRESSN TEE
12003220 930C3T 3 WAY COMPRESSN TEE

COMPRESSION ELL
Compression X Compression in 1/2" and 3/4"
12003070 710C-ELL CXC COMP 90 ELL
12003220 930C-ELL CXC COMP 90 ELL

COMPRESSION FPT ELL
1/2" Female Pipe Thread X Compression Ell
12003080 710CELLF FPTXC COMPXFPT 90

COMPRESSION COUPLING
Compression X Compression
12003100 710CC COMPRESSION COUPLING
12003240 930CC COMPRESSION COUPLING
12003290 700X930RCC COMP RED COUPLING

COMPRESSION END CAP
Compression End Plug w/Unscrewing Cap
12003140 710CETC THREADED END COMP
12003250 930CETC THREADED END COMP

COMPRESSION END VALVE
Flush Valve X Compression for flushing end of tube
12003150 710CEFCH COMP END FLUSH C

INSERT CONNECTORS
1/8" & 1/4" Tee Connectors, 1/4" Elbow Connectors, 1/8" & 1/4" Connectors
12001495 L/P COUPLING FOR 1/8 TUBING
12001496 L/P TEE FOR 1/8 TUBING
12001497 L/P COUPLING FOR 1/4 TUBING
12001498 L/P TEE FOR 1/4 TUBING
12001499 L/P ELL FOR 1/4 TUBING
12001500 COUPLING FOR 5/16-11-32 TBG

DUAL GOOF PLUG 1/8" X 1/4"
Allows for relocation of emitters by plugging existing hole after emitter is removed
- Two sizes on one plug
- Strips of 10
12001505 L/S PROD EMITTER PLUG 1/8X1/4

L/P S-6 STAKE
- Accepts 0.167 to 0.350 OD tubing
- Length - 6"
12001595 L/S PROD S-6 STAKE FOR 185/250

L/P DUAL 6 DRIP STAKE
- 6" length for better stability
- Two port sizes on one stake for use with 0.22" or 0.25" tubing
- Lower barb for better gripping
- Flat top facilitates pushing into ground by hand comfortably or can be hammered in
- Special material improves rigidity
12001602 L/S PROD DUAL-6 DRIP STAKE

Bug Cap
The new design of the Landscape Products Bug Cap provides the following advandages:
- Easier insertion and removal
- Full unobstructed flow
- Insects are prevented from entering the tubing
Stop by one of our distributors and ask for the Landscape Products Bug Cap.
Bug Cap Spec Sheet *pdf
12001490 L/P BUG CAP FOR 1/4 TUBING

IPS PVC Flex Hose
IPS Flex Hose *pdf
08008020 1/2 X 48 IN IPS PVC FLEX HOSE
08008026 3/4 X 48 IN IPS PVC FLEX HOSE
08008024 1/2 X 200 FT IPS PVC FLEX HOSE
08008030 3/4 X 200 FT IPS PVC FLEX HOSE
08008040 1 X 100 FT IPS PVC FLEX HOSE

