Valves/Sprinklers
VP SERIES CONTAMINATION RESISTANT PLASTIC REMOTE CONTROL VALVES
This valve is ideal for use on systems that have fine particles that may clog valves with filters or screens. From small commercial and effluent water systems to residential, the innovative metering design keeps the valve working and maintenance to a minimum.
Features:
- Internal manual bleed
- Simple, one-piece molded diaphragm
- Bleed water is metered through innovative flow passages to provide contamination resistance.
- Reinforced ribbed bonnet for surge protection
- Easily removable handle prevents tampering after the flow adjustment
Operating Specifications:
- Pressure: 3–150 psi
Print Spec Sheet*pdf
01000530 VP–10 L/P 1IN THD PLASTIC VALVE
01000550 VP-15 L/P 1-1/2IN PLASTIC VALVE
01000560 VP-20 L/P 2 INCH PLASTIC VALVE
VPA–10 THREADED PLUS ANGLE VALVE
These valves are proven, high quality plastic 1" diaphragm valves. The angle design allows installation of more valves per valve box, and is ideal for manifold systems where they may be rotated to align with multiple pipes. VPA valves are ideal for residential and commercial use.
Features:
- Internal manual bleed
- Reinforced ribbed bonnet for surge protection
- Easily removable handle prevents tampering after the flow adjustment
Operating Specifications:
- Pressure: 3–150
Print Spec Sheet*pdf
01000620 VPA–10 L/P 1IN THD PLS ANGLE VL
VPS–10 SLIP GLOBE VALVE
The valve is ideal for use on systems that have fine particles that may clog valves with filters or screens. From small commercial and effluent water systems to residential, the innovative metering design keeps the valve working and maintenance to a minimum.
Features:
- Internal manual bleed
- Reinforced ribbed bonnet for surge protection
- Easily removable handle prevents tampering after the flow adjustment
Operating Specifications:
- Pressure: 3-150
Print Spec Sheet*pdf
01000660 VPNS–10 L/P 1IN SS NOFLO PLS VL
01000650 VPS–10 L/P 1IN SS PLASTIC PLS VL
VPN-10 NO FLOW THREADED PLASTIC VALVE
The valve is ideal for use on systems that have fine particles that may clog valves with filters or screens. From small commercial and effluent water systems to residential, the innovative metering design keeps the valve working and maintenance to a minimum.
Features:
- Internal manual bleed
- Simple, one-piece molded design
- Bleed water is metered through innovative flow passages to provide contamination resistance
- Reinforced ribbed bonnet for surge protection
Operating Specifications:
- Pressure: 3-150
Print Spec Sheet*pdf
01000630 VPN-10 L/P 1IN NOFLO TT PLS VL
BRASS BALL VALVES
Landscape Products Full Port, Brass Ball Valves are suitable for a full range of liquids and gases in residential and commercial applications.
Features & Specifications:
- CSA approved
- Certified to NSF/ANSI Standard 61/8
- Adjustable stem packing gland provides longer service
- Bottom loaded blowout-proof stem
- PTFE stem packing seal and seats
- Machined chrome-plated brass ball
- Temperature Range: -60°F to 400°F
- Rated to 600psi WOG/150psi WSP 1/2" to 2"
- Rated to 400psi WOG/125psi WSP 2-1/2" to 3"
Print Spec Sheet*pdf
21013305 1/2" BBV-4 CSA & NSF BRASS VAL
21013307 3/4" BBV-4 CSA & NSF BRASS VAL
21013310 1"BBV-4 CSA & NSF BRASS VALVE
21013312 1-1/4" BBV-4 CSA & NSF BRASS
21013315 1-1/2" BBV-4 CSA & NSF BRASS
21013320 2" BBV-4 CSA & NSF BRASS VALVE
21013325 2-1/2" BBV-4 CSA & NSF BRASS
21013330 3" BBV-4 CSA & NSF BRASS VALVE
BRASS GATE VALVES
Landscape Products Brass Gate Valves can be used in water, oil, or compressed gas applications.
Features & Specifications:
- Brass body
- Non-rising stem
- Threaded bonnet
- Pressure rated to 200psi WOG non-shock
- Temperature Rated to 180° (82°C)
- 1/2" to 4" threaded IPS end connections
Print Spec Sheet*pdf
21003105 1/2 BGV BRASS GATE VALVE THD
21003107 3/4 BGV BRASS GATE VALVE THD
21003110 1BGV BRASS GATE VALVE THD
21003112 1-1/4 BGV BRASS GATE VALVE THD
21003115 1-1/2 BGV BRASS GATE VALVE THD
21003120 2 BGV BRASS GATE VALVE THD
21003125 2-1/2 BGV BRASS GATE VALVE THD
21003130 3 BGV BRASS GATE VALVE THD
21003140 4 BGV BRASS GATE VALVE THD
PLASTIC 4" & 6" POP – UP SPRINKLERS
Reliable and economical pop-up sprinkler, ideal for small turf and landscape areas. Will accept Rain Bird, Hunter and MP Rotator nozzles.
01000140 L/P 104 4 PLASTIC POPUP
01000160 L/P 106 6 PLASTIC POPUP
PLASTIC SHRUB ADAPTER
Male Adapter Features:
- Will accept Rain Bird, Hunter and MP Rotator plastic screens and nozzles
- 1/2" NPT
Female Adapter Features:
- Will accept Toro nozzles
01000010 L/P MALE PLASTIC SHRUB ADAPTER
01000020 L/P FEMALE PLASTIC SHRUB ADAPTER
TRIPLE SWING RISER
A true 3-way flex riser with Marlex elbow and free turning connectors attaches the sprinkler to the lateral pipes. Low-cost, reliable, and flexible connection prevents heads or pipes from breaking when run over by equipment and allows easy adjustment of the heads to grade.
Print Spec Sheet *pdf
01001100 1/2 X 7 L/P SWING RISER
01001102 1/2 X 3/4 X 7 L/P SWING RISER
01001104 3/4 X 3/4 X 7 L/P SWING RISER
01001105 1/2 X 13 L/P SWING RISER
01001107 1/2 X 3/4 X 13 L/P SWING RISER
01001108 3/4 X 3/4 X 13 L/P SWING RISER
LP BARBED SWING RISER
A flexible riser with barbed insert elbows allows free turning connections. The additional Marlex elbow adds extra flexibility when connecting sprinklers to laterals. A reliable and flexible connection at an economical price prevents sprinkler heads or pipes from breaking when run over by equipment and allows easy adjustment of the heads to grade.
Print Spec Sheet *pdf
01001010 BARBED SS 1/2 X 1/2 X 6 RISER
01001020 BARBED DS 1/2 X 1/2 X 6 RISER
01001030 BARBED SS 1/2 X 1/2 X 12 RISER
01001040 BARBED SS 1/2 X 3/4 X 12 RISER
01001050 BARBED DS 1/2 X 1/2 X 12 RISER
01001060 BARBED DS 1/2 X 3/4 X 12 RISER
POLY CUT-OFF NIPPLES
The polyethylene cut-off nipple starts off as a 1/2" x 6" or 3/4" x 6" nipple that can be cut into 1/2" x 1", 2", 3", 4" or 5" nipple lengths.
01001110 L/P BLK 1/2 X 6 CUT-OFF NIPPLE
01001120 L/P 3/4 X 6 CUT-OFF NIPPLE
01001125 L/P 3/4 X 1/2 X 6 CUTOFF NIPPLE
SWING RISER PIPE
The 1/2 poly swing riser pipe is made from linear low density polyethylene with added elastomers that make the product tough and resilient while flexible at the same time. This pipe is used with barbed fittings to attach sprinkler heads to buried laterals providing a flexible joint that helps prevent damage to the buried pipelines if the sprinkler is hit by maintenance equipment.
Print Spec Sheet*pdf
01004010 1/2 X 10FT SWING RISER PIPE
01004100 1/2 X 100FT ROLL SWING RISER
SWING RISER INSERT TEE
1/2 Insert X 1/2 Insert X 1/2 Insert
01004210 1/2 SWING RISER INSERT TEE
SWING RISER MPT INSERT TEE
1/2 Insert X 1/2 Insert X 1/2 Male Pipe Thread
01004310 1/2 MPT SWING RISER INSERT TEE
1/2 SWING RISER INSERT 90 ELL
1/2 Insert X 1/2 Male Pipe Thread 90° Ell
01004410 1/2 MPT SWING RISER 90 ELL
3/4 MPT SWING RISER 90 ELL
1/2 Insert X 3/4 Male Pipe Thread 90° Ell
01004420 3/4 MPT SWING RISER 90 ELL
1/2 FIPT SWING RISER 90 ELL
1/2 Insert X 1/2 Female Pipe Thread 90° Ell
01004510 1/2 FIPT SWING RISER 90 ELL
1/2 MPT SWING RISER MALE ADAPTER
1/2 Insert X 1/2 Male Pipe Thread Adapter
01004610 1/2 MPT SWING RISER MALE ADPT
3/4 MPT SWING RISER MALE ADAPTER
1/2 Insert X 3/4 Male Pipe Thread Adapter
01004620 3/4 MPT SWING RISER MALE ADPT
SWING RISER INSERT COUPLING
1/2 Insert X 1/2 Insert Coupling
01004810 SWING RISER INSERT COUPLING
1/2 MARLEX 90 STREET ELL TT
1/2 Male Pipe Thread X 1/2 Female Pipe Thread 90° Ell
04412105 1/2 MARLEX 90 STREET ELL TT
3/4 MARLEX 90 STREET ELL TT
3/4 Male Pipe Thread X 3/4 Female Pipe Thread 90° Ell
04412107 3/4 MALREX 90 STREET ELL TT
